ft. and 6 ft., Spinning Aluminum
Brushed or White Aluminum-finish, includes a
metallic ball ornament, 2 flag fasteners and a swivel-ring. The top 40" rotates
on ball bearings to prevent tangling. Fits in any 1" diameter holder or bracket.
For use with flags 3x5 ft. or smaller. Also available in White anodized or
Bright Aluminum finish. (Note that this 1-piece pole carries extra shipping
charges due to the package length) Also comes in 5 ft. length.
6', Spinning Aluminum
Flag Pole, 2-piece
Aluminum 2-piece spinning pole, just as strong as the 1-piece - and twice as
convenient! Includes a metallic ball ornament, 2 flag fasteners and a
swivel-ring. The top section rotates on ball bearings to prevent tangling. Fits
in any 1" diameter holder or bracket. For use with flags 3x5 ft. or smaller.
Choose from Brushed Aluminum, White Anodized, or Wood Grain finish. #555162-2PC
Railing-Mount 6 ft flagpole kit by NeverFurl™
high-quality kit is made in the USA, & is easy to install. A
heavy-duty adjustable clamp holds on to railings & fences
from 3/8" diameter up to 2" dia., whether square, round,
rectangular or even oval-shaped! Ideal for wrought-iron or
chain-link fences, balconies*, boat and RV railings, etc.
The NeverFurl™ non-tangle device, will
not wrap around the pole. Kit comes with 6 ft.
heavy-duty 1" dia. silver-colored brushed aluminum pole (in
2-sections, with NeverFurl™ device attached which adjusts to
any size flag), brass acorn ornament, rail mount bracket and clips.
Flag not included. *ground-level recommended
6 ft. x 1 in. White
Fiberglass Flag Pole, 1-piece with gold acorn
One piece 1"
diameter fiberglass pole, 6 ft. length with gold-finish
acorn ornament. Very strong "honeycomb" interior withstands
lots of stress. (Note that this 1-piece pole carries extra
shipping charges due to the package length)
6 ft., Flag Pole,
Pine with Spear
flagpole with gilt wood spear ornament. 6 ft. length x 15/16 in.
diameter. Clear laquer finish. (Note that this 1-piece pole
carries extra shipping charges due to the package length)
7 ft. x 1
/1/4 in., Oak 2-piece
oak flagpole, with fancy brass-finish screw joint. 7 ft.
assembled length made from carefully-selected straight grain
wood. Will accept any of our pole ornaments (not included) 551615
7 ft. x 1 /1/4 in., to 9 ft. x 1
1/4 Aluminum 2-piece
gold-anodized aluminum pole with tight-fitting screw joint,
breaks down to 2 pieces for convenient storage or travel. 7 ft.
assembled length. Threaded top to accept most of our pole
ornaments (not included)
8' x 1" Budget Aluminum Flag Pole, with ball
Aluminum poles that offer both economical and
attractive. Two piece poles wedge together
snuggly for a smooth satin finish. These
1”-diameter poles are supplied with a gold vinyl
ball ornament. All are supplied with two of our
Flag Attachment Rings, so you can attach a flag
with grommets. Silver mill finish.
ft Rotating Flag Pole with Ground Sleeve
white painted aluminum, two piece pole is your ultimate choice for an outdoor
display pole. The top rotates on ball bearings so the flag will never tangle.
For the easiest and most versatile installation, this pole comes with 2 flag
fasteners for flying a grommet equipped flag, plus a snap and swivel ring for
displaying banners with a pole sleeve & tab. Fully 9 feet tall and 1" in
diameter. The pole comes complete with a galvanized steel ground sleeve. Light
weight and portable, this makes a great pole for open houses, yard sales &
special events, too!
16 ft. and 19 ft., Multi-Use
quality aluminum flagpole includes all the accessories to fly a
flag or banner. It has 4 sections that snap-lock to full
extension, or twist lock at any height from 6ft up to 19ft. 2"
butt diameter, with a 1 3/8" top diameter. You can fly a flag or
a banner and they will rotate with the wind. The pole comes with
a 3 inch gold ball ornament & a ground socket for traditional
yard use - PLUS a Tire/Wheel Mount (just drive your tire onto
it, and your car's weight holds the pole securely) for portable
and tailgating use. Great for tail gate parties, or special
events. Take it anywhere -
you'll never need another flagpole! (flag not included) Due to
it's size & packaging a $4.50 handling charge is included in the
price. Pole & accessories are shipped in two cartons.
20 ft., Villager III
Fiberglass Flag Pole
This sectional pole
comes in 3 easy-to-assemble sections. Features all of the
Strength and Beauty of one-piece poles but lighter in weight and
* Easy installation
white gel-coat finish looks brand new after years of use.
* Beautiful tapered design compliments any type of architecture.
* Exceptional strength designed to withstand wind speeds in
excess of 100mph (un-flagged), Tensile strength is 50,000 lbs.
per square inch. Butt diameter of 3 3/4 inches, top diameter of
Comes complete with ground sleeve, white flash collar, 4" gold
ball ornament, easy-glide maintenance-free stationary top cap
(no pulleys to foul), cleat and rope. Flag not
Telescoping Flag Pole (Bronze,
Our 2.5" diameter
telescoping flagpole is made with tough 16 guage aluminum and
comes complete with 3" gold ball ornament, ground sleeve and
complete instructions. The pole telescopes down to 90" for easy
installation and/or portability. Unique attachment clip system
for flags allows the flag to rotate freely, and lets you extend
or collapse the pole with flag attached. Price includes $5.00
shipping surcharge due to length of packaging. Anodized silver
Sectional Aluminum Patio Flag Pole (White and Silver)
Sturdy aluminum sectional ground-set pole that is easy to install. Complete with
ground sleeve, gold ball with outrigger pulley, rope, flag snaps & cleat. White
finish. 2" butt diameter, .058" wall thickness.
Motorcycle Flag Pole
Motorcycle Flag Pole - a simple and sturdy flag mounting system for your
motorcycle. Black anodized solid aluminum pole is tapped and threaded on each
end, attaching to a rubber-padded bracket that clamps to your tail bar - black
ball ornament screws onto top. Total length is 15 in. x 5/8" diameter, ball is
1.375" diameter. Made for flags with sleeves or ties rather than grommets. Flag
Spinning Fasteners -- Stops flags from tangling!
Flag fastening rings - high-impact vinyl-plastic
rings with aluminum clips. Slides onto a 1" diameter
pole, and clips to the flag grommet. Makes it easy to
accommodate any flag with grommets, regardless of size!